SS01-Sports Utility film Camera with Flash waterproof to 100′/33m

SS01 Sports Utility Camera with Flash: This tough and durable film camera allows price points comparable to disposable camera models. The camera is preloaded with film, ready to use and can be reloaded easily with standard 35mm film. SS01 can be used above/below water, indoors/outdoors, night or day. Its unique features make it a perfect camera for a wide range of sports activities including: Diving, camping, kayaking, fishing, hiking and more! Each camera is individually pressure tested at the factory to 100 feet. Other tests include flash and winding operation. Rigorous quality control is one reason why we are industry leaders in low return rates and customer satisfaction. Model #SS01.

Features:

  • Waterproof to 100 feet / 33 meters
  • Built in Flash
  • Camera is reusable
  • Camlock clasp with hinged back.
  • 28m Focus Free Lens
  • Preloaded with 27 exposure Snap Sights Sports film
  • Flip up Sports Viewfinder
  • Pressure resistant shutter button
  • Shock Resistant, Heavy Duty Housing that floats
  • Hand strap included

Reloading Instructions

This camera is designed for reusability and is warranted against defects in material and workmanship for 180 days from purchase date. Abuse or misuse of product is not covered under warranty. Special care must be taken when using waterproof products.

Please visit our Product Support page for further information on care and maintenance.

1) Lift safety catch on cam lock and twist the cam lock to the open position. Gently open housing and remove camera.

2) Press film release button (at bottom of camera).

3) Wind rewind lever (at top of camera) in clockwise direction until film winds free.

4) Lift rewind lever to release film from camera.

5) Remove red sticker and open back of camera to remove exposed film.

6) Insert new film and extend film tip to the right hand winding spool. Make sure holes in film are aligned with wind sprocket gear teeth.

7) Close back of camera and replace red sticker.

8) Advance film to # 1 in the frame counter on top of camera. (If the counter does not advance film is not loaded correctly, repeat step 6).

9) Make sure that the O-ring seal is clean of sand, dirt or other debris.

10) Align camera in housing, close back and twist cam lock to closed position.

Compare Models

Care and Maintenance

  1. Rinse thoroughly in clean fresh water after each use.
  2. Clean O ring after each use
  3. Keep O ring lightly lubricated with silicon grease.

Storage

Store cameras with the housing open to prevent flattening of O ring. If storing with film store in a dry, cool area. Heat and moisture are very damaging to film.

Film Replacement

Snap Sights cameras will work with any brand, standard 35mm film. Film is rated by ASA. The following chart shows the most common ratings and applications:

  • ASA/ISO 100 – Use outdoors on sunny days.
  • ASA/ISO 200 – Same as 100
  • ASA/ISO 400 – Indoor/outdoor, lower light, shallow water, faster movement.
  • ASA/ISO 800 – Indoor/Outdoor, darker, deeper water, faster movement
  • ASA/ISO 1000+ – Fast Action low light
BUY INTOVA PRODUCTS FROM AUTHORIZED DEALERS ONLY: To ensure proper warranty coverage, make sure Intova products are purchased from legitimate retailers only. Be sure that the dealer has a mailing address and provides a receipt that verifies: Dealer Name and Address. Customer Name and Address. Date of Purchase. Complete Description and Cost of items purchased. Receipt must be presented for warranty service.